Derek,
The original voltmeter is obsolete. We replace it with a 91370-001, 0-150 meter, 120 volt input. Modifications to install include enlarging the hole slightly, by grinding it out, and drilling three small mounting holes. Please call our Service Department if you wish to order it. 507-357-6831.
Randy, the original Winpower voltmeter is obsolete. We sell an electrical equivalent voltmeter, however you have to modify the mounting of it. 91370-001 is the replacement voltmeter used for all the old Winpower PTO generators. Please call our Parts Department @ 507-357-8332 to order the part.
I have a winpower model 25/15 pt 2 serial number dd 1179-65. it was purchased new by my dad and we used for emergency power for our dairy farm. Is there a renew or repair kit for items which are often needed? The only repairs we have made is a drive chain replacement,
Charles, please contact our Parts Department at 507-357-8332. There is no repair kit. Parts are all sold individually. Most of the parts are obsolete because your model was built in Newton, Iowa at the Winpower factory. The Winpower factory in Newton closed in 1987. Winco purchased Winpower in 1996, to join Winco here in Minnesota.
Hi! I inherited a 25/15PT2, Serial # DD-697-44 generator. The gearbox sticker notes to use EP transmission oil. Is there a modern oil you can recommend? Thanks!
Question
Anna Eckhardt –
WHAT KIND OF 2P 70A BREAKER DOES THIS MODEL TAKE
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Dale Riebel –
Anna, we would sell a 57030-006, 70 amp circuit 2-pole circuit breaker. You can call our Service Department to order it if you wish @ 507-357-6831.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
DEREK MCCARTHY –
WE ARE LOOKING FOR A P&D FOR A VOLTMETER FOR MODEL#25/15PT2
PART#VM716 REF# 9
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Dale Riebel –
Derek,
The original voltmeter is obsolete. We replace it with a 91370-001, 0-150 meter, 120 volt input. Modifications to install include enlarging the hole slightly, by grinding it out, and drilling three small mounting holes. Please call our Service Department if you wish to order it. 507-357-6831.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Randy Schlick –
Is this the same volt meter that would fit in a 30/20 PTO Generator
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Dale Riebel –
Randy, the original Winpower voltmeter is obsolete. We sell an electrical equivalent voltmeter, however you have to modify the mounting of it. 91370-001 is the replacement voltmeter used for all the old Winpower PTO generators. Please call our Parts Department @ 507-357-8332 to order the part.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Dave Johnson –
Looking for voltmeter for a 45/25 PT2
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Dale Riebel –
Dave, please call our Parts Department 507-357-8332. They have a replacement for the obsolete original.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Doug –
what amount of horsepower is needed for model 25/15pt2?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Dale Riebel –
Doug, you would need 30 horsepower at the tractor PTO.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Robert Bancroft –
My 25/15 will start and run a hard starting 10 HP centrifugal fan, but there needs to be 50-60 HP in front of it!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Dale Riebel –
Robert, please contact our Technical Support Department @ 507-357-8334 or [email protected]. They will be happy to assist you.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Charles Rowe –
I have a winpower model 25/15 pt 2 serial number dd 1179-65. it was purchased new by my dad and we used for emergency power for our dairy farm. Is there a renew or repair kit for items which are often needed? The only repairs we have made is a drive chain replacement,
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Dale Riebel –
Charles, please contact our Parts Department at 507-357-8332. There is no repair kit. Parts are all sold individually. Most of the parts are obsolete because your model was built in Newton, Iowa at the Winpower factory. The Winpower factory in Newton closed in 1987. Winco purchased Winpower in 1996, to join Winco here in Minnesota.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Brandon S. –
Hi! I inherited a 25/15PT2, Serial # DD-697-44 generator. The gearbox sticker notes to use EP transmission oil. Is there a modern oil you can recommend? Thanks!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Dale Riebel –
Brandon, please use 85W gear-oil in the gear case. Any brand is ok. We currently use 85W-140 gear lube.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal