Product Features
Starting at 50,000 standby watts, this 50PTO is single phase
with a 540RPM gearcase.
Rugged Design
   Our own WINCO gearcases have proven their strength
   and durability for over 60 years and will keep doing so
   into the future.
Low Harmonic Distortion
   Provides clean power for both farm and home.
Frequency Meter
   A large 3 1/2″ frequency meter ensures the proper output.
Premium Circuit Breakers
   Providing clear and instant identification of a tripped circuit.
Protective PTO Shield
   Safety is always a priority.
5-Wire Anderson Full Power Plug Included
100% Load Tested
   You won’t find statistical sampling here. We load test every
   generator before it leaves our facility.
Question
Trey Beck –
Will my tractor run this generator. I have a Case 990 with 54 HP at the PTO.
Thanks
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Josie Krugerud –
Hello Trey,
In the PTO world, you will get roughly 1 kW per 2HP from the tractor’s PTO. Your tractor will definitely run the generator, but you will not get the full capacity. You will get about 27kW from your tractor. You will just have to make sure not to overload your tractor and cause it to stall. We do offer the 27PTO if you want to match your tractor’s kW potential. If you have more questions, you can always call us at 507-357-6821.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Morgan Wilson –
If I have a 150 hp tractor with a 1000 rpm pto, can I run a 540 adaptor and just run the engine fast enough to get 540? I’m thinking it would save some fuel and engine wear and tear if it wasn’t running at full rated and still would have enough power to spin the generator.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Dale Riebel –
Morgan, please contact our Technical Support Department at 507-357-8334 or [email protected].
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Oscar Coleman –
I have a MF 5445 with PTO rated 70-75 hp. Which of your generators would you match this with?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Admin Josie Krugerud –
Hello Oscar, the rule of thumb is you need 2 HP for every 1kW. Your tractor can produce around 35 kW with this formula. We offer a 27PTO and a 50PTO. You can use your tractor with either one of these. You will only get out as much as the 27PTO produces, see spec sheet for output per your application. You will only get what the tractor can produce (35kW) from the 50PTO. If you have any further questions on sizing, please contact our sales department 507-357-6821.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Don Scott –
I have a 50kw pto generater 120/240 v it has a Anderson 4 wire cont.with cover do you sell this separate
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Dale Riebel –
Don, please call our Parts Department @ 507-357-8332 to order it.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal